|
The Hypertherm Powermax30 plasma cutting system is the ultimate system for metal cutting up to 3/8 (10 mm). Its designed and built for tough environments but is very compact and weighs only 20 pounds (9 kg). An optional carry case and shoulder strap make transporting the system even easier.
Hand torch cut capacity
Recommended: up to 1/4" (6 mm) at cutting speeds of
33" (838 mm) per minute
Maximum: up to 3/8" (10 mm) at cutting speeds of
15" (381 mm) per minute
Severance: up to 1/2" (12 mm) at slow speed
Hypertherm Power supply features 30 amps, 2.5 kW output Auto-voltage circuit Boosted open circuit voltage. Active electronic pilot arc controller Consumable holderFactory pre-set air regulator
Hypertherm T30v torch and consumable features tapered consumables for improved arc visibility Safety triggerContact-start arc initiationHyLife electrode technologyShielded front-end consumables FineCut quality on thin material
Applications: HVAC fabrication and installation, Steel constructionPlumbing and sprinkler installation, Automotive repair, Commercial kitchen installation, Farm maintenance, Metal artwork, Other sheet metal applications
|
Features |
Plant Contents Hypertherm Powermax30 |
|
Cutting depth at 500mm/minute is 6mm |
Hypertherm Powermax30 Plasma Cutter |
|
Cutting depth at 250mm/minute is 10mm |
Supplied accessories and documentation | | |
| | | |
 |
| |
|
Product Specification & Features Hypertherm Powermax30 Plasma Cutter |
| |
| |
|
|
 |
|
|
|
| |
|
|
Input Voltages
|
CSA
CE |
120 230 V, 1-PH, 50/60 Hz
120 230 V, 1-PH, 50/60 Hz |
| Input Current @ 2.49 kW |
CSA
CE |
120 230 V, 1-PH, 26 13.5 A
120 230 V, 1-PH, 26 13.5 A |
| Output current |
|
15 - 30 A |
| Rated output voltage |
|
83 VDC |
| Duty cycle @ 40°C (104°F) |
CSA
CE |
50%, 230 V
35%, 120 V
50%, 230 V
35%, 120 V |
| Open circuit voltage (OCV) |
|
240 VDC |
| Dimensions with handles |
|
14.0" (356 mm) D; 6.6" (168 mm) W;
12.0" (305 mm) H |
| Weight with 15' (4.5 m) torch |
CSA
CE |
20 lbs (9.7 kg)
21 lbs (10 kg) |
| Gas Supply |
|
Clean, dry, oil-free air or nitrogen |
Recommended gas inlet
flow rate / pressure |
240 scfh, 4 scfm (113 l/min)
@ 80 psi (5.5 bar) |
| Input power cable length |
|
10' (3 m) |
| Power supply type |
|
Inverter - IGBT | |
|
|
| |
|
|
| |
|
|
| Material |
Thickness |
Current |
Maximum cut speed* |
| |
inches |
mm |
amps |
ipm |
mm/min |
| Mild Steel |
18 GA
10 GA
3/16
1/4
3/8 |
1
3
5
6
10 |
30
30
30
30
30 |
394
87
52
33
15 |
10007
2210
1321
838
381 |
| Stainless Steel |
18 GA
10 GA
1/4
3/8 |
1
3
6
10 |
30
30
30
30 |
399
78
26
11 |
10135
1981
660
279 |
| Aluminum |
18 GA
10 GA
1/4
3/8 |
1
3
6
10 |
30
30
30
30 |
221
55
24
11 |
5613
1397
610
279 | |
|
|
| |
| |
|
| | |