|
The Tokentools Alupulse 315DX is a 415 volt 3 phase full arc control, AC & DC TIG / MMA, HF TIG power source. Loaded with features like high frequency start, up/down slope, adjustable AC frequency, pulse AC, pulse DC, repeat (latch) function, MMA welding you’ve got the ultimate unit designed for precision TIG and MMAW of all weldable materials with a huge 315 Amp output in TIG and 250 Amp output in stick. The machine features push button activated HF Arc Ignition and a Gas Solenoid for automatic control of the shielding gas. A super large capacity fan ensures years of high duty cycle operation. Operation is quite straight forward via the easy to use and understand control panel and the steel case will provide superior protection against accidental bumps. All IGBT transistors are manufactured by Infineon, chosen for their ability to provide dependable power in the toughest of environments.
A complete package including a water cooled Tig torch, remote foot control, gas reg.
Optional upgrades - Water cooler, remote finger controlled Binzel Tig torch.
|
Features |
Plant Contents – Alupulse 315DX |
|
• IGBT inverter power drive matrix |
• Alupulse 315DX 315 Amp Power Source |
| • Easy to use digital display and panel control |
• 8 metre WP18 series water cooled TIG Torch |
| • Adjustable AC frequency control 10hz to 300hz |
• Remote foot control |
| • Pulse welding with full paramateric control |
• Gas regulator |
| • Low and high pulse frequencies 0.5 to 500 Hz |
• 3 metre earth cable and clamp |
| • HF start TIG & MMAW modes |
• 3 metre MMA cable and holder |
| • 2T, 4T with up/down slope and repeat function |
• 3 metre gas line |
| • Start and finish crater current presets |
• TIG accessory kit |
| • Intelligent self diagnostic protection |
• Instruction manual |
| • Great duty cycle 315A 35% @ 40 Degrees C |
|
| • Rugged protective case |
| | |