Tig welders * Mig welders * Arc Welders * Plasma cutters * Welding supplies * New welder sales * Inverter welding machines * Buy a welder * Inverter Welder repairs * Automatic Welding Helmets * Welding Machines * Tokentools

Our inverter welding range includes TIG MIG ARC welders and Plasma cuters. We supply both IGBT and MOSFET inverter drive systems to the market. Our inverter welders provide ample duty cycle to achieve your workload within Australian environmental conditions. Tokentools is an established Australian registered trademark and is key stakeholder in the design and manufacture of the welding equipment offered for sale on this site.Tokentools Pty Ltd is a family owned Australian company specialising in the sale and service of inverter welding machines and related products.
Unit 6, 9-11 Willow Tree Rd Wyong NSW 2259 Australia
1300 881 991
Tokentools Pty Ltd ABN 70112497793

 

 

  • Navigation help

    Products are grouped into categories and most categories cover all that you require, machines, torches, consumables etc.

    Welding helmets, positioners and carts are located in the welding accessories section.

    Help is available on 1300 881 991 if you get bogged down in choices.

    You may email us at sales@tokentools.com.au



    • Arc162 - Inverter Arc Welder
    Arc162 - Inverter Arc Welder

    Brief overview
    • MMA stick and ARC welder
    • Lightweight and portable welder power source
    • Can be used as a scratch start TIG welder
    • Inverter welder

     

    Miniarc142ST - Inverter Lift Arc Tig Welder Arc Welder
    Miniarc142ST - Inverter Lift Arc Tig Welder Arc Welder

    Brief overview
    • MMA stick and ARC welder
    • Lightweight and portable welder power source
    • Lift arc TIG welder
    • Inverter welder

     

    TIG160P - Inverter Tig Welder Arc Welder
    TIG160P - Inverter Tig Welder Arc Welder

    Brief overview
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Pulse TIG welding mode
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    PAC50 - Inverter Plasma Cutter 16-20mm Cut
    PAC50 - Inverter Plasma Cutter 16-20mm Cut

    Brief overview
     
    • HF Plasma cutter
    • 20 mm severance cut
    • 50 amp cutting current
    • 16 mm clean cut
    • HF plasma cutting arc ignition
    • Includes 60 series plasma cutting torch
    • Uses compressed air for cutting
    • Lightweight and portable

     

    Multi 164 - Inverter Tig Welder Arc Welder Plasma Cutter
    Multi 164 - Inverter Tig Welder Arc Welder Plasma Cutter

    Brief overview
    • DC welder suitable for steels
    • 160 amp welding current
    • Integrated pilot arc plasma cutter
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    TIG 200P - Inverter Tig Welder Arc Welder
    TIG 200P - Inverter Tig Welder Arc Welder

    Brief overview
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Pulse TIG welding mode
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    LG40E Pilot - Inverter Pilot Arc Plasma Cutter
    LG40E Pilot - Inverter Pilot Arc Plasma Cutter

    Brief overview
    • HF Plasma cutter with pilot arc
    • 16 mm severance cut
    • 40 amp cutting current
    • 12mm clean cut
    • Pilot arc ignition - ideal for CNC application
    • Includes AG60 plasma cutting torch
    • Uses compressed air for cutting
    • Lightweight and portable

     

    MIG200 - Inverter Mig Welder Tig Welder Arc Welder
    MIG200 - Inverter Mig Welder Tig Welder Arc Welder

    Features
    Plant Contents – MIG200
    • MIG + TIG + Stick MMA welding in one machine
    • MIG200 Power Source
    • Easy to use digital display and panel control
    • 3 metre TBI MIG Torch
    • Gear driven roller
    • 3 metre TIG Torch
    • 100+ arc length voltage selections
    • 3 metre earth cable and clamp
    • Intelligent self diagnostic protection
    • 3 metre MMA cable and holder
    • IGBT inverter core matrix
    • 1 MIG tip spanner
    • Easy polarity reversal for gas or gasless wires
    • 2 spare tips
    • Light weight and powerful, just 16 kilos
    • 1 metre reinforced gas line
    • Rugged protective case
    • 1 instruction manual
    • Rigid spindle rod
    		  

     

    Welding rotator positioner 300mm table
    Welding rotator positioner 300mm table

    Brief overview
     
    • Welding rotator / positioner
    • 300 mm table diameter
    • 50 kilo load capacity
    • Dinse 35-70 earthing socket
    • Digital preset for rotational angle, rest time and repeat
    • Adjustable rotation speed
    • Multiple table angles from horizontal to vertical
    • Foot control included for ease of use

     

    TIG160D - Inverter Digital Tig Welder Arc Welder
    TIG160D - Inverter Digital Tig Welder Arc Welder

    Brief overview
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Digital control interface
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    Alupulse IGBT 200A AC DC Tig Welder
    Alupulse IGBT 200A AC DC Tig Welder

    Brief overview
     
    • AC DC welder suitable for steels and alloys
    • 200 amp welding current
    • Membrane control panel
    •Wideband AC welding frequency to 300 Hz
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Pulse TIG welding mode
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    Alusync IGBT 200A AC DC Tig Plasma Welder
    Alusync IGBT 200A AC DC Tig Plasma Welder

    Brief overview
    • AC DC welder suitable for steels and alloys
    • 200 amp welding current
    • Integrated plasma cutter
    •Wideband AC welding frequency to 300 Hz
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Pulse TIG welding mode
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    FNBC315 - Transformer 315 amp MIG welder with quad gear wire feeder
    FNBC315 - Transformer 315 amp MIG welder with quad gear wire feeder

    Features
     
    • 315 amp MIG welder
    • 18 arc length voltage selections
    • Easy to use digital display and panel control
    • Intelligent self diagnostic protection
    • Quad gear linked and gear driven roller
    		  

     

    Alupulse IGBT 200A AC DC Tig Welder & Foot Con & Reg
    Alupulse IGBT 200A AC DC Tig Welder & Foot Con & Reg

    Brief overview
     
    • AC DC welder suitable for steels and alloys
    • 200 amp welding current
    • Membrane control panel
    •Wideband AC welding frequency to 300 Hz
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Pulse TIG welding mode
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    Alusync IGBT 200A AC DC Tig Plasma Welder & Foot Con & Reg
    Alusync IGBT 200A AC DC Tig Plasma Welder & Foot Con & Reg

    Brief overview
    • AC DC welder suitable for steels and alloys
    • 200 amp welding current
    • Integrated plasma cutter
    •Wideband AC welding frequency to 300 Hz
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Pulse TIG welding mode
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    Hypertherm Powermax 30 Plasma Cutter
    Hypertherm Powermax 30 Plasma Cutter

    Brief overview
    • Quality brand
    • Intelligent pressure adjustment based on cut
    • Cutting depth at 500mm/minute is 6mm
    • Hypertherm Powermax30 Plasma Cutter
    • Cutting depth at 250mm/minute is 10mm
    • Supplied accessories and documentation

     

    Alupulse IGBT 315A AC DC Tig Welder & Foot Con & Reg
    Alupulse IGBT 315A AC DC Tig Welder & Foot Con & Reg

    Brief overview
     
    • AC DC welder suitable for steels and alloys
    • 315 amp welding current
    • 3 phase 415 volt
    • Abundant control settings for all pplictions
    • Fully featured high frequency TIG welder
    • Slope current controls
    • Pulse TIG welding mode
    • Lightweight and portable
    • Push button TIG arc start
    • Inverter welder
    • Can be used as an ARC welder
    • Digital amps display

     

    Current Category WELDING MACHINES

     

    Copyright Tokentools 1998 - 2011

  • Want to save even more with our 24 hour spot sales!

    Occasionally we have spot promotions on some products with savings up to 30% off our wholesale list price. Sign up to our mailing list and be sure to receive the special discount coupon code prior to any sales event.
    * = required field